Replace the aging rubber front & rear brake hoses

Having found that the hoses were still the original type & therefore could be 15 years old. I replaced them for braided kit from HEL. If you do the same you will find you get 2 front hoses not 3 as per original lay out. The longer one of the two goes to the left and be sure to order a double banjo bolt WITH bleed screw for the top union to the master cylinder.

Being a hoarder of bits bling I had a pair of R6 calipers and Master cylinder spare, what I did not have was a reservoir so I ordered 3 @ £8.00 each from :- Tyga-Performance Their man Paul was very helpful & delivery was very quick + they use PayPal

The results you can see here:-



star-caliper
R6 blue bling Calipers, the old FZR's were just as good to be fair.
What make the difference is the R6's master cylinder different diameter



R6-lever
Adjustable reach R6 Lever pivot

res-mount
The TYGA reservoir mounted on the Banjo bolt, without obscuring the dash

Get Adobe Reader Join the Blue Ribbon Online Free Speech Campaign
3D Animated Flags by 3DFlags.com

Back to:- FZR Project Info page

This Page Sponsored by The Saltmine Org. UK

UK flag animation ©   Geo of K.G.B. of T & T.  UK flag animation