Italian art behind Japanese comfort with a dash of K.G.B custom push rod to make it work !

The GSXR rear sets were on EBAY as being " slightly bent " well No problem Break off the toe rod, straighten the lever, drill & tap the lever end through the old weld. Make new toe rod, add rubber, Yee Haw a working set up. Cheaper than the Harris set up bought by this set's original owner.:-}

All the bits for the gear shift

Fully assembled Gear shift set up

Well, since I have never used GSXR rear sets before I decided I had better have flexibility in riding positions, this problem is not helped by the fact that the RD4 frame fixing peg brackets are not symmetrical on the frame hence the two different hole matrix positions on the plates.

Fully assembled & Powder coated Rider foot peg & brake lever